<ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
                    xmlns:system="clr-namespace:System;assembly=mscorlib">
    <!-- 窗口标题 -->
    <system:String x:Key="WindowTitle">睡眠呼吸暂停治疗面罩多功能测试仪</system:String>
    <system:String x:Key="WindowTitle1">排气流测试</system:String>
    <system:String x:Key="WindowTitle2">气阻测试</system:String>
    <system:String x:Key="WindowTitle3">防室息阀测试</system:String>
    <system:String x:Key="WindowTitle4">单一故障吸阻力测试</system:String>
    <system:String x:Key="WindowTitle5">二氧化碳重呼吸吸测试</system:String>
    <!-- 实时显示区域 -->
    <system:String x:Key="RealTimeDisplay">提示: 调节设定压力，该时的流量</system:String>
    <system:String x:Key="CurrentTest">设定压力：</system:String>
    <system:String x:Key="Setting">设置</system:String>
    <system:String x:Key="TriggerDisplacement">校准压力</system:String>

    <system:String x:Key="CurrentPosition">实时流量</system:String>

    <system:String x:Key="RealTimePressure">实时压力</system:String>
    <system:String x:Key="EndDisplacement">记录流量</system:String>
    <system:String x:Key="Deformation">主页</system:String>
    <system:String x:Key="Maximumforcevaluetestresult(N)">测试启动</system:String>
    <system:String x:Key="Deformation test results">测试停止</system:String>
    <system:String x:Key="Peak force test result(N)">连接口压力</system:String>
    <!-- 测试结果区域 -->
    <system:String x:Key="TestResults">鼻口压力:</system:String>
    <system:String x:Key="Next">气阻测试</system:String>
    <system:String x:Key="Deformation1">设定流量</system:String>
    <system:String x:Key="Deformation2">连接口校准</system:String>
    <system:String x:Key="Deformation4">设置</system:String>
    <system:String x:Key="Deformation5">实时流量</system:String>
    <system:String x:Key="Deformation6">记录气阻</system:String>

    <system:String x:Key="Report">报表</system:String>

    <system:String x:Key="Deformation7">进入</system:String>

    <system:String x:Key="Deformation8">防室息阀压力测试</system:String>

    <system:String x:Key="Deformation9">开关阀选择</system:String>
    <system:String x:Key="Deformation10">防室息阀压力测试</system:String>
    <system:String x:Key="TestSpeedLabel">开阀捕捉</system:String>
    <system:String x:Key="SetPressureLabel">关阀捕捉</system:String>
    <system:String x:Key="It has been crushed">设置开阀压力判别</system:String>

    <system:String x:Key="The force value determines the pressure difference">设置</system:String>
    <!-- 参数设置区域 -->
    <system:String x:Key="ParameterSettings">参数设置</system:String>
    <system:String x:Key="TestSpeed">设置关阀压力判别</system:String>
    <system:String x:Key="TestDisplacement">开阀压力</system:String>
    <system:String x:Key="TriggerValue">关阀压力</system:String>

    <system:String x:Key="SetPressure">记录开阀</system:String>
    <system:String x:Key="ResetDistance">记录关阀</system:String>
    <system:String x:Key="TestCount">测试次数设置</system:String>
    <!-- 按钮文本 -->
    <system:String x:Key="Reset">复位</system:String>
    <system:String x:Key="Test">测试</system:String>
    <system:String x:Key="Stop">停止</system:String>
    <system:String x:Key="Up">上升</system:String>
    <system:String x:Key="Down">下降</system:String>
    <system:String x:Key="Zero">清零</system:String>
    <!-- 底部导航 -->
    
    
     <!--zhangjing-->
    
    
    <system:String x:Key="setFlow">呼气/吸气</system:String>
    <system:String x:Key="setFlow1">呼气</system:String>
    <system:String x:Key="setFlow11">吸气</system:String>
    <system:String x:Key="setFlow111">呼吸类别</system:String>
    <system:String x:Key="setFlow2">单一故障气阻测试</system:String>
    <system:String x:Key="setFlow3">设置流量</system:String>
    <system:String x:Key="setFlow4">设置</system:String>
    <system:String x:Key="setFlow6">校准</system:String>
    <system:String x:Key="setFlow7">呼流量</system:String>
    <system:String x:Key="setFlow8">记录呼气阻力</system:String>
    <system:String x:Key="setFlow5">鼻口压力</system:String>
    <system:String x:Key="setFlow9">吸流量</system:String>
    <system:String x:Key="setFlow10">记录吸气阻力</system:String>
    <system:String x:Key="setFlow112">呼气阻力</system:String>
    <system:String x:Key="setFlow12">吸气阻力</system:String>

    
    <system:String x:Key="test">CO2重吸呼吸测试界面</system:String>
    <system:String x:Key="test1">呼吸比</system:String>
     <system:String x:Key="test111">呼吸参数设置</system:String>
    <system:String x:Key="test2">设置</system:String>
    <system:String x:Key="test3">潮气量</system:String>
    <system:String x:Key="test4">呼吸频率</system:String>
    <system:String x:Key="test5">频率系数</system:String>
    <system:String x:Key="test6">测试辅助参数</system:String>
    <system:String x:Key="test7">呼吸次数</system:String>
    <system:String x:Key="test77">呼吸计时</system:String>
    <system:String x:Key="test8">次/min</system:String>
    <system:String x:Key="test9">分</system:String>
    <system:String x:Key="test10">秒</system:String>
    <system:String x:Key="test11">实时监测数据</system:String>
    <system:String x:Key="test1212">准备中</system:String>
    <system:String x:Key="test12">呼气</system:String>
    <system:String x:Key="test13">呼吸管路压力</system:String>
    <system:String x:Key="test14">CO2浓度</system:String>
    <system:String x:Key="test15">CO2测试结果</system:String>
    <system:String x:Key="test16">开始CO2浓度</system:String>
    <system:String x:Key="test17">结束CO2浓度</system:String>
    <system:String x:Key="test18">CO2浓度增加值</system:String>

    <system:String x:Key="test19">复位</system:String>
    <system:String x:Key="test20">测试启动</system:String>
    <system:String x:Key="test21">测试停止</system:String>
    <system:String x:Key="test22">加压</system:String>
    <system:String x:Key="test23">开始记录</system:String>
    <system:String x:Key="test24">结束记录</system:String>
    <system:String x:Key="test25">主页</system:String>
    <system:String x:Key="test26">曲线</system:String>
    <system:String x:Key="test27">手动界面</system:String>
    <system:String x:Key="test28">记录画面</system:String>
    <system:String x:Key="test29">过程记录</system:String>


    <system:String x:Key="PositionToPressure">定位移测压力</system:String>
    <system:String x:Key="PressureToDisplacement">定压力测位移</system:String>
    <system:String x:Key="PeakTest">峰值测试</system:String>
    <system:String x:Key="ViewReport">查看报表</system:String>
    <system:String x:Key="ViewCurve">查看曲线</system:String>
    <system:String x:Key="BtnZhText">中文</system:String>
    <system:String x:Key="BtnEnText">English</system:String>
    <system:String x:Key="Calibration">校准</system:String>
    <system:String x:Key="Test Date">测试日期:</system:String>
    <system:String x:Key="Test Time">测试时间:</system:String>
    <system:String x:Key="Sample No">测试时间:</system:String>
    <system:String x:Key="Test Status">测试状态:</system:String>
    <system:String x:Key="Workstation curve description">工位曲线说明:</system:String>
    <system:String x:Key="All workstation tests have been completed">全部工位测试完成</system:String>
    <system:String x:Key="PressureDeformationCurve">压力-变形量关系曲线</system:String>
    <system:String x:Key="RealTimeData">实时数据</system:String>

    <!-- 其他文本资源 -->
    <system:String x:Key="ReturnButton">返回</system:String>
    <system:String x:Key="SystemParameters">系统参数设置</system:String>
    <system:String x:Key="DeviceParameters">设备参数</system:String>
    <system:String x:Key="ResetSpeed">上下电机复位速度</system:String>
    <system:String x:Key="ManualSpeed">上下手动速度</system:String>
    <system:String x:Key="PressureCoefficient">压力系数</system:String>
    <system:String x:Key="PressureProtection">压力保护</system:String>
    <system:String x:Key="Language">语言</system:String>
    <system:String x:Key="StatusBarText">系统参数设置 - 请谨慎修改</system:String>
    <system:String x:Key="WindowTitle7">系统参数设置</system:String>
    <!-- 单位 -->
    <system:String x:Key="Unit_mm_min">mm/min</system:String>
    <system:String x:Key="Unit_N_V">N/V</system:String>
    <system:String x:Key="Unit_N">N</system:String>

    <!-- 语言选项 -->
    <system:String x:Key="Chinese">中文</system:String>
    <system:String x:Key="English">English</system:String>

    <system:String x:Key="ROUNDS">第</system:String>
    <system:String x:Key="Systemparameter">系统参数</system:String>
    <system:String x:Key="TestPeakValue">试验峰值</system:String>
    <system:String x:Key="MaximumPressure">最大压力</system:String>

    <system:String x:Key="Maximum stroke soft limit">最大行程软限位</system:String>


    <!-- 基本信息 -->
    <system:String x:Key="TestDate">测试日期：</system:String>
    <system:String x:Key="TestTime">测试时间：</system:String>
    <system:String x:Key="Experimenter">实验员：</system:String>
    <system:String x:Key="SampleNumber">样品编号：</system:String>

    <!-- 报表分区标题 -->
    <system:String x:Key="PositionToPressureMaxForce">定位移测压力(最大力值)</system:String>
    <system:String x:Key="PositionToPressureDeformation">定位移测压力（变形量）</system:String>
    <system:String x:Key="PressureToDisplacementDeformation">定压力测位移（变形量）</system:String>
    <system:String x:Key="PeakTestPeakForce">峰值测试（峰值力）</system:String>
    <system:String x:Key="PeakTestDeformation">峰值测试（变形量）</system:String>
    <system:String x:Key="Experimental Report">实验报表</system:String>

    <!-- 结果表格标题 -->
    <system:String x:Key="MaxForce">最大力值</system:String>

    <!-- 按钮文本 -->
    <system:String x:Key="Back">返回</system:String>
    <system:String x:Key="Print">打印</system:String>
    <system:String x:Key="Export">导出</system:String>
    <system:String x:Key="Save">保存</system:String>
    <system:String x:Key="Close">关闭</system:String>
    <system:String x:Key="Test speed (mm/min)">测试速度(mm/min)</system:String>
    <system:String x:Key="Constant pressure (N)">定压压力(N)</system:String>
    <system:String x:Key="1# Maximum Force Value (N)">1#最大力值(N)</system:String>
    <system:String x:Key="2# Maximum Force Value (N)">2#最大力值(N)</system:String>
    <system:String x:Key="3# Maximum Force Value (N)">3#最大力值(N)</system:String>
    <system:String x:Key="4# Maximum Force Value (N)">4#最大力值(N)</system:String>
    <system:String x:Key="5# Maximum Force Value (N)">5#最大力值(N)</system:String>

    <system:String x:Key="6# Maximum Force Value (N)">6#最大力值(N)</system:String>
    <system:String x:Key="7# Maximum Force Value (N)">7#最大力值(N)</system:String>
    <system:String x:Key="8# Maximum Force Value (N)">8#最大力值(N)</system:String>
    <system:String x:Key="9# Maximum Force Value (N)">9#最大力值(N)</system:String>
    <system:String x:Key="10# Maximum Force Value (N)">10#最大力值(N)</system:String>


    <system:String x:Key="Peak test (peak force)">峰值测试（峰值力）</system:String>


</ResourceDictionary>