Resources/Strings.zh-CN.xaml

@@ -17,7 +17,6 @@
     <system:String x:Key="CurrentPosition">实时流量</system:String>
 
     <system:String x:Key="RealTimePressure">实时压力</system:String>
-
     <system:String x:Key="EndDisplacement">记录流量</system:String>
     <system:String x:Key="Deformation">主页</system:String>
     <system:String x:Key="Maximumforcevaluetestresult(N)">测试启动</system:String>
@@ -28,7 +27,6 @@
     <system:String x:Key="Next">气阻测试</system:String>
     <system:String x:Key="Deformation1">设定流量</system:String>
     <system:String x:Key="Deformation2">连接口校准</system:String>
-    <system:String x:Key="Deformation3">校准</system:String>
     <system:String x:Key="Deformation4">设置</system:String>
     <system:String x:Key="Deformation5">实时流量</system:String>
     <system:String x:Key="Deformation6">记录气阻</system:String>
@@ -41,20 +39,25 @@
 
 
     <system:String x:Key="Deformation7">进入</system:String>
-    <system:String x:Key="Deformation8">8#形变量</system:String>
-    <system:String x:Key="Deformation9">9#形变量</system:String>
-    <system:String x:Key="Deformation10">10#形变量</system:String>
-    <system:String x:Key="TestSpeedLabel">测试速度</system:String>
-    <system:String x:Key="SetPressureLabel">定压压力</system:String>
-    <system:String x:Key="It has been crushed">已压破</system:String>
-    <system:String x:Key="The force value determines the pressure difference">力值判断压差</system:String>
+
+
+    <system:String x:Key="Deformation8">防室息阀压力测试</system:String>
+
+    <system:String x:Key="Deformation9">开关阀选择</system:String>
+    <system:String x:Key="Deformation10">防室息阀压力测试</system:String>
+    <system:String x:Key="TestSpeedLabel">开阀捕捉</system:String>
+    <system:String x:Key="SetPressureLabel">关阀捕捉</system:String>
+    <system:String x:Key="It has been crushed">设置开阀压力判别</system:String>
+
+    <system:String x:Key="The force value determines the pressure difference">设置</system:String>
     <!-- 参数设置区域 -->
     <system:String x:Key="ParameterSettings">参数设置</system:String>
-    <system:String x:Key="TestSpeed">测试速度</system:String>
-    <system:String x:Key="TestDisplacement">测试位移</system:String>
-    <system:String x:Key="TriggerValue">触发值</system:String>
-    <system:String x:Key="SetPressure">设置压力</system:String>
-    <system:String x:Key="ResetDistance">复位向下距离</system:String>
+    <system:String x:Key="TestSpeed">设置关阀压力判别</system:String>
+    <system:String x:Key="TestDisplacement">开阀压力</system:String>
+    <system:String x:Key="TriggerValue">关阀压力</system:String>
+
+    <system:String x:Key="SetPressure">记录开阀</system:String>
+    <system:String x:Key="ResetDistance">记录关阀</system:String>
     <system:String x:Key="TestCount">测试次数设置</system:String>
     <!-- 按钮文本 -->
     <system:String x:Key="Reset">复位</system:String>