页面翻译，测试启动还留着。

Resources/Strings.en-US.xaml

@@ -69,12 +69,35 @@
     <system:String x:Key="Sample No">Sample No:</system:String>
     <system:String x:Key="Systemparameter">System Parameter</system:String>
     <system:String x:Key="Test speed (mm/min)">Test speed (mm/min)</system:String>
+    
+    
+    
+    <!--zhangjing-->
+    <system:String x:Key="setFlow">Exhalation/Inhalation</system:String>
+    <system:String x:Key="setFlow1">exhale</system:String>
+    <system:String x:Key="setFlow11">Inhale</system:String>
+    <system:String x:Key="setFlow111">Breathing category</system:String>
+    <system:String x:Key="setFlow2">Single fault air resistance test</system:String>
+    <system:String x:Key="setFlow3">Set traffic</system:String>
+    <system:String x:Key="setFlow4">Settings</system:String>
+    <system:String x:Key="setFlow5">Nasal and oral pressure</system:String>
+    <system:String x:Key="setFlow6">Calibration</system:String>
+    <system:String x:Key="setFlow7">Data traffic volume</system:String>
+    <system:String x:Key="setFlow8">Record exhalation resistance</system:String>
+    <system:String x:Key="setFlow9">Inflow rate</system:String>
+    <system:String x:Key="setFlow10">Record the resistance during inhalation</system:String>
+    <system:String x:Key="setFlow112">Exhalation resistance</system:String>
+    <system:String x:Key="setFlow12">Inhalation resistance</system:String>
+
+
+
     <system:String x:Key="Workstation curve description">Workstation curve description:</system:String>
     <system:String x:Key="Test Status">Test Status</system:String>
     <system:String x:Key="Experimental Report">Experimental Report</system:String>
     <system:String x:Key="Constant pressure (N)">Constant pressure (N)</system:String>
     <system:String x:Key="All workstation tests have been completed">All workstation tests have been completed</system:String>
 
+
     <system:String x:Key="RealTimeData">real time data</system:String>
     <system:String x:Key="PressureDeformationCurve">Pressure-deformation relationship curve</system:String>
     <!-- Other Text Resources -->

Resources/Strings.zh-CN.xaml

@@ -21,7 +21,7 @@
     <system:String x:Key="Deformation">主页</system:String>
     <system:String x:Key="Maximumforcevaluetestresult(N)">测试启动</system:String>
     <system:String x:Key="Deformation test results">测试停止</system:String>
-    <system:String x:Key="Peak force test result(N)">连接口压力：</system:String>
+    <system:String x:Key="Peak force test result(N)">连接口压力</system:String>
     <!-- 测试结果区域 -->
     <system:String x:Key="TestResults">鼻口压力:</system:String>
     <system:String x:Key="Next">气阻测试</system:String>
@@ -67,6 +67,29 @@
     <system:String x:Key="Down">下降</system:String>
     <system:String x:Key="Zero">清零</system:String>
     <!-- 底部导航 -->
+    
+    
+    
+    
+    
+     <!--zhangjing-->
+    <system:String x:Key="setFlow">呼气/吸气</system:String>
+    <system:String x:Key="setFlow1">呼气</system:String>
+    <system:String x:Key="setFlow11">吸气</system:String>
+    <system:String x:Key="setFlow111">呼吸类别</system:String>
+    <system:String x:Key="setFlow2">单一故障气阻测试</system:String>
+    <system:String x:Key="setFlow3">设置流量</system:String>
+    <system:String x:Key="setFlow4">设置</system:String>
+    <system:String x:Key="setFlow6">校准</system:String>
+    <system:String x:Key="setFlow7">呼流量</system:String>
+    <system:String x:Key="setFlow8">记录呼气阻力</system:String>
+    <system:String x:Key="setFlow5">鼻口压力</system:String>
+    <system:String x:Key="setFlow9">吸流量</system:String>
+    <system:String x:Key="setFlow10">记录吸气阻力</system:String>
+    <system:String x:Key="setFlow112">呼气阻力</system:String>
+    <system:String x:Key="setFlow12">吸气阻力</system:String>
+
+
     <system:String x:Key="PositionToPressure">定位移测压力</system:String>
     <system:String x:Key="PressureToDisplacement">定压力测位移</system:String>
     <system:String x:Key="PeakTest">峰值测试</system:String>