Sleep-Multi-functionality/Window5.xaml.cs

using Microsoft.Win32;
using Modbus.Device;
using Modbus;
using OfficeOpenXml;
using System;
using System.Configuration;
using System.Data.SQLite;
using System.IO;
using System.Net.Sockets;
using System.Runtime.Intrinsics;
using System.Threading.Tasks;
using System.Timers;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Input;
using System.Windows.Media;
using System.Windows.Media.Animation;
using System.Windows.Media.Imaging;
using 口罩泄露定制款;

namespace ShanghaiEnvironmentalTechnology
{
    /// <summary>
    /// 呼吸相关参数监控窗口（Modbus通信+CO2数据记录）
    /// </summary>
    public partial class Window5 : Window, IDisposable
    {
        DataChange c = new DataChange();
        #region 寄存器/线圈地址定义（按功能分组，标注物理意义）
        // 鼻口相关
        private readonly ushort _outRegisterAddress = 0x0038; // 呼吸次数（D56）
        private readonly ushort _breathMinuteAddress = 0x09CA; // 呼吸计时分
        private readonly ushort _breathSecondAddress = 0x09C6; // 呼吸计时秒

        // 呼路管与CO2相关
        private readonly ushort _breathOutAddress = 3030;   // 呼路管压力
        private readonly ushort _co2Address = 3006;         // CO2浓度
        private readonly ushort _co2BeginAddress = 0x0190;    // CO2开始浓度
        private readonly ushort _co2EndAddress = 0x019A;      // CO2结束浓度
        private readonly ushort _co2AddAddress = 0x0198;      // CO2浓度增加值

        // 控制线圈（M代码）
        private readonly ushort _testStartAddress = 97;    // 二氧化碳测试启动（M97）
        private readonly ushort _resetAddress = 0x0003;        // 复位（M2）
        private readonly ushort _testStopAddress = 0x0008;     // 测试停止（M8）

        Function fc;
        #endregion

        #region 私有字段
        // Modbus通信
        private TcpClient _tcpClient;
        private IModbusMaster _modbusMaster;

        // 定时器（按功能分组）
        private System.Timers.Timer _outReadTimer;          // 鼻口参数读取
        private System.Timers.Timer _breathTimer;           // 呼吸计时读取
        private System.Timers.Timer _co2Timer;              // 呼路管+CO2浓度读取
        private System.Timers.Timer _co2BeginEndTimer;      // CO2开始/结束浓度读取
        private System.Timers.Timer _co2AddTimer;           // CO2增加值读取
        private System.Timers.Timer _beginRecordTimer;      // 数据记录定时器

        private System.Timers.Timer startTimer; // 启动状态实时定时器
        private System.Timers.Timer resetTimer; // 启动状态实时定时器
        private System.Timers.Timer breathTimer;

        #endregion

        #region 私有字段（新增）
        // 编辑状态标志位（控制是否更新TextBox）
        private bool _isEditingOut;       // 呼吸比-呼气
        private bool _isEditingIn;        // 呼吸比-吸气
        private bool _isEditingMoisture;  // 潮气量
        private bool _isEditingRespRate;  // 呼吸频率
        private bool _isEditingFrequency; // 频率系数

        // 定时器（1个定时器管理4个参数的实时读取）
        private System.Timers.Timer _paramReadTimer;



        #endregion

        public Window5()
        {
            InitializeComponent();
            InitializeModbusTcp();
            Loaded += Window_Loaded; // 延迟加载背景，避免初始化阻塞
        }

        #region 初始化与资源释放（强化资源管理）
        /// <summary>
        /// 初始化Modbus连接和定时器
        /// </summary>
        private void InitializeModbusTcp()
        {
            try
            {
                // 从配置读取PLC连接信息
                string plcIp = ConfigurationManager.AppSettings["PLC2_IP"];
                int plcPort = int.Parse(ConfigurationManager.AppSettings["PLC2_Port"]);

                _tcpClient = new TcpClient(plcIp, plcPort);
                _modbusMaster = ModbusIpMaster.CreateIp(_tcpClient);
                _modbusMaster.Transport.ReadTimeout = 3000;
                _modbusMaster.Transport.WriteTimeout = 3000;

                _paramReadTimer = CreateTimer(1000, OnParamTimerElapsed);
                // 初始化定时器
                InitializeTimers();
                fc = new Function(_modbusMaster);
                // 初始化数据库
                InitializeDatabase();
            }
            catch (Exception ex)
            {
                ShowError($"Modbus初始化失败: {ex.Message}");
            }
        }


        private void OnParamTimerElapsed(object sender, ElapsedEventArgs e)
        {
            // 1. 读取呼吸比（呼气）
            if (!_isEditingOut)
            {
                ReadAndUpdateSingleRegister(342, true, v1 =>
                {
                    UpdatePressureUI1(v1.ToString());
                });
            }

            // 2. 读取呼吸比（吸气）
            if (!_isEditingIn)
            {
                ReadAndUpdateSingleRegister(
                    340,
                    isFloat: true, value =>
                    UpdatePressureUI2(value.ToString())
                );
            }

            // 3. 读取潮气量
            if (!_isEditingMoisture)
            {
                ReadAndUpdateSingleRegister(
                    300,
                    isFloat: true,
                    value => UpdatePressureUI3(value.ToString())
                );
            }

            // 4. 读取呼吸频率
            if (!_isEditingRespRate)
            {
                ReadAndUpdateSingleRegister(
                    210,
                    isFloat: true,
                    value => UpdatePressureUI4(value.ToString())
                );
            }

            // 5. 读取频率系数
            if (!_isEditingFrequency)
            {
                ReadAndUpdateSingleRegister(
                    368,
                    isFloat: true,
                    value => UpdatePressureUI5(value.ToString())
                );
            }
        }

        #region 输入验证（仅允许数字输入）
        /// <summary>
        /// 通用数字输入过滤（支持整数和小数）
        /// </summary>
        private void NumberPreviewTextInput(object sender, TextCompositionEventArgs e)
        {
            var textBox = sender as TextBox;
            // 允许数字和一个小数点（如“123”“123.45”）
            var isNumber = System.Text.RegularExpressions.Regex.IsMatch(e.Text, @"^[0-9]*(?:\.[0-9]*)?$");
            // 禁止重复输入小数点
            if (e.Text == "." && textBox?.Text.Contains(".") == true)
            {
                isNumber = false;
            }
            e.Handled = !isNumber;
        }
        #endregion
        /// <summary>
        /// 统一初始化所有定时器（避免重复配置）
        /// </summary>
        private void InitializeTimers()
        {
            _outReadTimer = CreateTimer(1000, OnOutTimerElapsed);
            _breathTimer = CreateTimer(1000, OnBreathTimerElapsed);
            _co2Timer = CreateTimer(500, OnCo2TimerElapsed);
            _co2BeginEndTimer = CreateTimer(1000, OnCO2BeginEndTimerElapsed);
            _co2AddTimer = CreateTimer(1000, OnCO2AddTimerElapsed);

            startTimer = CreateTimer(1000, OnStartTimerElapsed);
            resetTimer = CreateTimer(1000, OnResetTimerElapsed);
            breathTimer = CreateTimer(1000, OnbreathTimerElapsed);
        }

        private void OnStartTimerElapsed(object sender, ElapsedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            try
            {
                bool[] result = _modbusMaster?.ReadCoils(0x01, 98, 1);
                bool isRunning = result != null && result.Length > 0 && result[0];

                TestStartButton.Dispatcher.Invoke(() =>
                {
                    if (isRunning)
                    {
                        btn1.IsEnabled = false;
                        btn2.IsEnabled = false;
                        btn3.IsEnabled = false;
                        btn4.IsEnabled = false;
                        btn5.IsEnabled = false;

                        TestStartButton.Content = _lang == "en-US" ? "Test Started" : "测试启动成功";
                        TestStartButton.Foreground = Brushes.LightGreen;
                    }
                    else
                    {
                        btn1.IsEnabled = true;
                        btn2.IsEnabled = true;
                        btn3.IsEnabled = true;
                        btn4.IsEnabled = true;
                        btn5.IsEnabled = true;

                        TestStartButton.Content = _lang == "en-US" ? "Start Test" : "测试启动";
                        TestStartButton.Foreground = Brushes.White;
                    }
                });
            }
            catch (Exception ex)
            {
                Console.WriteLine(_lang == "en-US" ? $"Failed to read coil: {ex.Message}" : $"读取线圈或更新UI失败：{ex.Message}");
            }
        }

        private void OnResetTimerElapsed(object sender, ElapsedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            try
            {
                bool[] result = _modbusMaster?.ReadCoils(0x01, 3, 1);
                bool isRunning = result != null && result.Length > 0 && result[0];

                ResetBtn.Dispatcher.Invoke(() =>
                {
                    if (isRunning)
                    {
                        ResetBtn.Content = _lang == "en-US" ? "Reset Success" : "复位成功";
                        ResetBtn.Foreground = Brushes.LightGreen;
                    }
                    else
                    {
                        ResetBtn.Content = _lang == "en-US" ? "Reset" : "复位";
                        ResetBtn.Foreground = Brushes.White;
                    }
                });
            }
            catch (Exception ex)
            {
                Console.WriteLine(_lang == "en-US" ? $"Failed to read coil: {ex.Message}" : $"读取线圈或更新UI失败：{ex.Message}");
            }
        }

        //int i = 0;

        // 新增：记录当前状态（避免重复触发）
        private string _currentBreathState = ""; // 可能的值："吸气"、"呼气"、"异常"

        private void OnbreathTimerElapsed(object sender, ElapsedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            try
            {
                bool[] inhale = _modbusMaster?.ReadCoils(0x01, 51, 1);
                bool[] exhale = _modbusMaster?.ReadCoils(0x01, 55, 1);
                bool isIn = inhale != null && inhale.Length > 0 && inhale[0];
                bool isEx = exhale != null && exhale.Length > 0 && exhale[0];

                string newState;
                if ((isIn && isEx) || (!isIn && !isEx))
                    newState = _lang == "en-US" ? "Error" : "异常";
                else if (isIn)
                    newState = _lang == "en-US" ? "Inhale" : "吸气";
                else
                    newState = _lang == "en-US" ? "Exhale" : "呼气";

                if (newState != _currentBreathState)
                {
                    breathType.Dispatcher.Invoke(() =>
                    {
                        _currentBreathState = newState;
                        if (newState == (_lang == "en-US" ? "Error" : "异常"))
                        {
                            breathType.Text = _lang == "en-US" ? "Standby" : "待机";
                            StopAllAnimations();
                            breathType.Foreground = Brushes.Orange;
                            breathType.FontSize = 20;
                            breathType.Opacity = 1.0;
                        }
                        else if (newState == (_lang == "en-US" ? "Inhale" : "吸气"))
                        {
                            breathType.Text = _lang == "en-US" ? "Inhale" : "吸气";
                            StopAllAnimations();
                            var colorAnim = new ColorAnimation(Colors.Gray, Colors.Green, TimeSpan.FromSeconds(2.5));
                            var brush = new SolidColorBrush(Colors.Gray);
                            breathType.Foreground = brush;
                            brush.BeginAnimation(SolidColorBrush.ColorProperty, colorAnim);
                            var sizeAnim = new DoubleAnimation(16, 40, TimeSpan.FromSeconds(2.5));
                            var opacAnim = new DoubleAnimation(0.5, 1.0, TimeSpan.FromSeconds(2.5));
                            breathType.BeginAnimation(TextBlock.FontSizeProperty, sizeAnim);
                            breathType.BeginAnimation(TextBlock.OpacityProperty, opacAnim);
                        }
                        else
                        {
                            breathType.Text = _lang == "en-US" ? "Exhale" : "呼气";
                            StopAllAnimations();
                            var colorAnim = new ColorAnimation(Colors.Green, Colors.Red, TimeSpan.FromSeconds(2.5));
                            var brush = new SolidColorBrush(Colors.Green);
                            breathType.Foreground = brush;
                            brush.BeginAnimation(SolidColorBrush.ColorProperty, colorAnim);
                            var sizeAnim = new DoubleAnimation(40, 16, TimeSpan.FromSeconds(2.5));
                            var opacAnim = new DoubleAnimation(1.0, 0.5, TimeSpan.FromSeconds(2.5));
                            breathType.BeginAnimation(TextBlock.FontSizeProperty, sizeAnim);
                            breathType.BeginAnimation(TextBlock.OpacityProperty, opacAnim);
                        }
                    });
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine(_lang == "en-US" ? $"Failed to read coil: {ex.Message}" : $"读取线圈或更新UI失败：{ex.Message}");
            }
        }

        // 新增：停止所有动画的辅助方法
        private void StopAllAnimations()
        {
            // 停止动画（null表示移除动画）
            breathType.BeginAnimation(TextBlock.FontSizeProperty, null);
            breathType.BeginAnimation(TextBlock.OpacityProperty, null);
            if (breathType.Foreground is SolidColorBrush brush)
            {
                //brush.BeginAnimation(SolidColorBrush.ColorProperty, null);
            }
        }


        /// <summary>
        /// 通用定时器创建方法（统一配置）
        /// </summary>
        private System.Timers.Timer CreateTimer(int intervalMs, ElapsedEventHandler elapsedAction)
        {
            var timer = new System.Timers.Timer(intervalMs)
            {
                AutoReset = true,
                Enabled = true
            };
            timer.Elapsed += elapsedAction;
            return timer;
        }

        /// <summary>
        /// 初始化数据库（创建CO2记录表）
        /// </summary>
        private void InitializeDatabase()
        {
            try
            {
                using (var connection = new SQLiteConnection(CSConstant.DbConnectionString))
                {
                    connection.Open();
                    string createTableSql = @"
                        CREATE TABLE IF NOT EXISTS CO2 (
                            Id INTEGER PRIMARY KEY AUTOINCREMENT,
                            Flow REAL NOT NULL,
                            Pressure REAL NOT NULL,
                            BeginCO2 REAL NOT NULL,
                            EndCO2 REAL NOT NULL,
                            CO2Added REAL NOT NULL,
                            RecordTime DATETIME NOT NULL
                        );";
                    using (var command = new SQLiteCommand(createTableSql, connection))
                    {
                        command.ExecuteNonQuery();
                    }
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine($"数据库初始化失败: {ex.Message}");
                ShowError($"数据库错误: {ex.Message}");
            }
        }

        /// <summary>
        /// 释放所有资源（避免内存泄漏）
        /// </summary>
        public void Dispose()
        {
            // 释放定时器（含数据记录定时器）
            _outReadTimer?.Dispose();
            _breathTimer?.Dispose();
            _co2Timer?.Dispose();
            _co2BeginEndTimer?.Dispose();
            _co2AddTimer?.Dispose();
            _beginRecordTimer?.Dispose();

            // 释放Modbus连接
            _tcpClient?.Close();
            _tcpClient?.Dispose();
            _modbusMaster = null;
        }

        /// <summary>
        /// 窗口关闭时强制释放资源
        /// </summary>
        protected override void OnClosed(EventArgs e)
        {
            base.OnClosed(e);
            Dispose();
        }
        #endregion

        #region 定时器读取逻辑（优化异常处理）
        /// <summary>
        /// 鼻口参数读取（呼吸次数）
        /// </summary>
        private void OnOutTimerElapsed(object sender, ElapsedEventArgs e)
        {
            ReadAndUpdateSingleRegister(
                _outRegisterAddress, false,
                value => UpdateOutUI(value.ToString())
            );
        }

        /// <summary>
        /// 呼吸计时读取（分+秒）
        /// </summary>
        private void OnBreathTimerElapsed(object sender, ElapsedEventArgs e)
        {
            ReadAndUpdateDualRegisterUshort(
                _breathMinuteAddress,
                _breathSecondAddress,
                (min, sec) => UpdateTimerUI(min.ToString(), sec.ToString())
            );
        }

        /// <summary>
        /// 呼路管压力+CO2浓度读取
        /// </summary>
        private void OnCo2TimerElapsed(object sender, ElapsedEventArgs e)
        {
            ReadAndUpdateDualRegister(
                _breathOutAddress,
                _co2Address,
                (pressure, co2) => UpdateCo2TimerUI(pressure.ToString(), co2.ToString())
            );
        }

        /// <summary>
        /// 数据记录定时器（定时保存CO2相关参数）
        /// </summary>
        private void OnBeginRecordTimerElapsed(object sender, ElapsedEventArgs e)
        {
            if (!IsModbusConnected()) return;

            try
            {

                float flowData = ReadAndUpdateSingleRegisterWithNoUI(_co2Address, true);
                float pressureData = ReadAndUpdateSingleRegisterWithNoUI(_breathOutAddress, true);
                float beginCo2Data = ReadAndUpdateSingleRegisterWithNoUI(_co2BeginAddress, true);
                float endCo2Data = ReadAndUpdateSingleRegisterWithNoUI(_co2EndAddress, true);
                float addCo2Data = ReadAndUpdateSingleRegisterWithNoUI(_co2AddAddress, true);

                // 保存到数据库
                SaveRecordToDatabase(
                    flowData,
                    pressureData,
                    beginCo2Data,
                    endCo2Data,
                    addCo2Data
                );
            }
            catch (Exception ex)
            {
                Console.WriteLine($"数据记录失败: {ex.Message}");
            }
        }

        /// <summary>
        /// CO2开始/结束浓度读取
        /// </summary>
        private void OnCO2BeginEndTimerElapsed(object sender, ElapsedEventArgs e)
        {
            ReadAndUpdateDualRegister(
                _co2BeginAddress,
                _co2EndAddress,
                (begin, end) => UpdateCO2BeginEndTimerUI(begin.ToString(), end.ToString())
            );
        }

        /// <summary>
        /// CO2增加值读取
        /// </summary>
        private void OnCO2AddTimerElapsed(object sender, ElapsedEventArgs e)
        {
            ReadAndUpdateSingleRegister(
                _co2AddAddress, true,
                value => UpdateCO2AddTimerUI(value.ToString())
            );
        }
        #endregion

        #region Modbus通用操作（提取重复逻辑）
        /// <summary>
        /// 通用寄存器读取并更新UI，支持16位整数和32位浮点数
        /// </summary>
        /// <param name="address">起始地址</param>
        /// <param name="isFloat">是否为浮点型（占用2个寄存器）</param>
        /// <param name="updateAction">更新UI的回调函数</param>
        private void ReadAndUpdateSingleRegister(ushort address, bool isFloat, Action<object> updateAction)
        {
            if (!IsModbusConnected())
            {
                updateAction?.Invoke(isFloat ? (object)float.NaN : (ushort)0);
                return;
            }

            try
            {
                // 根据数据类型确定读取的寄存器数量
                int registerCount = isFloat ? 2 : 1;
                ushort[] data = _modbusMaster?.ReadHoldingRegisters(0x01, address, (ushort)registerCount);

                if (isFloat)
                {
                    // 浮点型转换（2个16位寄存器组合为32位浮点数）
                    if (data.Length >= 2)
                    {


                        // 2. 解析寄存器值（data[0]是D312，data[1]是D313）
                        ushort a = data[0];  // 高位寄存器值
                        ushort b = data[1];  // 低位寄存器值

                        float floatValue = c.UshortToFloat(b, a);
                        floatValue = (float)Math.Round(floatValue, 2);
                        updateAction?.Invoke(floatValue);
                    }
                    else
                    {
                        updateAction?.Invoke(float.NaN);
                    }
                }
                else
                {
                    // 16位整数直接返回
                    updateAction?.Invoke(data.Length > 0 ? data[0] : (ushort)0);
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine($"读取寄存器[{address:X4}]失败: {ex.Message}");
                // 异常时根据类型返回对应的值
                updateAction?.Invoke(isFloat ? (object)float.NaN : (ushort)0);
            }
        }

        private float ReadAndUpdateSingleRegisterWithNoUI(ushort address, bool isFloat)
        {
            if (!IsModbusConnected())
            {

                return 0;
            }

            try
            {
                // 根据数据类型确定读取的寄存器数量
                int registerCount = isFloat ? 2 : 1;
                ushort[] data = _modbusMaster?.ReadHoldingRegisters(0x01, address, (ushort)registerCount);

                if (isFloat)
                {
                    // 浮点型转换（2个16位寄存器组合为32位浮点数）
                    if (data.Length >= 2)
                    {


                        // 2. 解析寄存器值（data[0]是D312，data[1]是D313）
                        ushort a = data[0];  // 高位寄存器值
                        ushort b = data[1];  // 低位寄存器值

                        float floatValue = c.UshortToFloat(b, a);
                        floatValue = (float)Math.Round(floatValue, 2);
                        return floatValue;
                    }
                    else
                    {
                        return 0;
                    }
                }
                else
                {
                    return 0;
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine($"读取寄存器[{address:X4}]失败: {ex.Message}");
                return 0;
            }
        }

        /// <summary>
        /// 读取两个寄存器并更新UI（统一处理连接状态）
        /// </summary>
        private void ReadAndUpdateDualRegister(ushort address1, ushort address2, Action<float, float> updateAction)
        {
            if (!IsModbusConnected())
            {
                updateAction?.Invoke(0, 0); // 触发UI显示"连接断开"
                return;
            }

            try
            {
                ushort[] data1 = _modbusMaster?.ReadHoldingRegisters(0x01, address1, 2);
                ushort[] data2 = _modbusMaster?.ReadHoldingRegisters(0x01, address2, 2);

                // 2. 解析寄存器值（data[0]是D312，data[1]是D313）
                ushort a = data1[0];  // 高位寄存器值
                ushort b = data1[1];  // 低位寄存器值

                float floatValue = c.UshortToFloat(b, a);
                floatValue = (float)Math.Round(floatValue, 2);


                // 2. 解析寄存器值（data[0]是D312，data[1]是D313）
                ushort a1 = data2[0];  // 高位寄存器值
                ushort b1 = data2[1];  // 低位寄存器值

                float floatValue2 = c.UshortToFloat(b1, a1);
                floatValue2 = (float)Math.Round(floatValue2, 2);

                updateAction?.Invoke(floatValue, floatValue2);
            }
            catch (Exception ex)
            {
                Console.WriteLine($"读取寄存器[{address1:X4},{address2:X4}]失败: {ex.Message}");
                updateAction?.Invoke(0, 0); // 触发UI显示"读取失败"
            }
        }

        /// <summary>
        /// 读取两个寄存器并更新UI（统一处理连接状态）
        /// </summary>
        private void ReadAndUpdateDualRegisterUshort(ushort address1, ushort address2, Action<float, float> updateAction)
        {
            if (!IsModbusConnected())
            {
                updateAction?.Invoke(0, 0); // 触发UI显示"连接断开"
                return;
            }

            try
            {
                ushort[] data1 = _modbusMaster?.ReadHoldingRegisters(0x01, address1, 2);
                ushort[] data2 = _modbusMaster?.ReadHoldingRegisters(0x01, address2, 2);


                ushort floatValue = data1[0];

                ushort floatValue2 = data2[0];


                updateAction?.Invoke(floatValue, floatValue2);
            }
            catch (Exception ex)
            {
                Console.WriteLine($"读取寄存器[{address1:X4},{address2:X4}]失败: {ex.Message}");
                updateAction?.Invoke(0, 0); // 触发UI显示"读取失败"
            }
        }

        /// <summary>
        /// 检查Modbus连接状态（统一判断逻辑）
        /// </summary>
        private bool IsModbusConnected()
        {
            return _modbusMaster != null && _tcpClient?.Connected == true;
        }
        #endregion

        #region UI更新（统一线程安全处理）



        private void UpdateConnectionTextUI(System.Windows.Controls.TextBox textBox, string value)
        {
            // 获取当前语言（默认中文）
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";

            // 多语言提示信息
            string disconnectMsg = currentLanguage == "en-US" ? "Connection disconnected" : "连接断开";

            // 安全更新UI
            UpdateUiSafely(() =>
                textBox.Text = IsModbusConnected() ? value : disconnectMsg
            );
        }

        private void UpdateConnectionTextUI(System.Windows.Controls.TextBlock textBox, string value)
        {
            // 获取当前语言（默认中文）
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";

            // 多语言提示信息
            string disconnectMsg = currentLanguage == "en-US" ? "Connection disconnected" : "连接断开";

            // 安全更新UI
            UpdateUiSafely(() =>
                textBox.Text = IsModbusConnected() ? value : disconnectMsg
            );
        }





        private void UpdateOutUI(string val)
        {
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            UpdateUiSafely(() => respiratoryCountTxt.Text = IsModbusConnected() ? val : (currentLanguage == "en-US" ? "Disconnected" : "连接断开"));
        }






        /// <summary>
        /// 更新呼吸计时UI
        /// </summary>
        private void UpdateTimerUI(string minute, string second)
        {
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            UpdateUiSafely(() =>
            {
                breathTimeBegin.Text = IsModbusConnected() ? minute : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
                breathTimeEnd.Text = IsModbusConnected() ? second : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
            });
        }

        /// <summary>
        /// 更新CO2和呼路管压力UI
        /// </summary>
        private void UpdateCo2TimerUI(string pressure, string co2)
        {
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            UpdateUiSafely(() =>
            {
                RespiratoryPressureTxt.Text = IsModbusConnected() ? pressure : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
                CO2PressureTxt.Text = IsModbusConnected() ? co2 : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
            });
        }

        /// <summary>
        /// 更新CO2开始/结束浓度UI
        /// </summary>
        private void UpdateCO2BeginEndTimerUI(string begin, string end)
        {
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            UpdateUiSafely(() =>
            {
                CO2BeginTb.Text = IsModbusConnected() ? begin : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
                CO2EndTb.Text = IsModbusConnected() ? end : (currentLanguage == "en-US" ? "Disconnected" : "连接断开");
            });
        }

        /// <summary>
        /// 更新CO2增加值UI
        /// </summary>
        private void UpdateCO2AddTimerUI(string value)
        {
            string currentLanguage = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            UpdateUiSafely(() =>
                CO2AddTxt.Text = IsModbusConnected() ? value : (currentLanguage == "en-US" ? "Disconnected" : "连接断开")
            );
        }


        /// <summary>
        /// 更新潮气UI（按钮写入后刷新）
        /// </summary>
        private void UpdatePressureUI1(string value)
        {
            UpdateUiSafely(() => OutTxt.Text = value);
        }

        /// <summary>
        /// 更新潮气UI（按钮写入后刷新）
        /// </summary>
        private void UpdatePressureUI2(string value)
        {
            UpdateUiSafely(() => InTxt.Text = value);
        }

        /// <summary>
        /// 更新潮气UI（按钮写入后刷新）
        /// </summary>
        private void UpdatePressureUI3(string value)
        {
            UpdateUiSafely(() => moistureTxt.Text = value);
        }

        /// <summary>
        /// 更新潮气UI（按钮写入后刷新）
        /// </summary>
        private void UpdatePressureUI4(string value)
        {
            UpdateUiSafely(() => respiratoryRateTxt.Text = value);
        }

        /// <summary>
        /// 更新潮气UI（按钮写入后刷新）
        /// </summary>
        private void UpdatePressureUI5(string value)
        {
            UpdateUiSafely(() => frequencyTxt.Text = value);
        }

        /// <summary>
        /// 线程安全的UI更新通用方法（统一实现）
        /// </summary>
        private void UpdateUiSafely(Action action)
        {
            if (action == null) return;


            if (Dispatcher.HasShutdownStarted)
            {
                return;
            }

            try
            {
                if (!Dispatcher.CheckAccess())
                {

                    Dispatcher.Invoke(action, TimeSpan.FromSeconds(2));
                }
                else
                {
                    action.Invoke();
                }
            }
            catch (TaskCanceledException)
            {

            }
            catch (Exception ex)
            {
                Console.WriteLine($"UI更新失败：{ex.Message}");
            }
        }

        #endregion

        #region


        /// <summary>
        /// 返回主窗口
        /// </summary>
        private void Button_Click_4(object sender, RoutedEventArgs e)
        {
            var mainWindow = MainWindow.Instance;

            // 检查窗口状态，只在窗口未显示时调用ShowDialog
            if (!mainWindow.IsVisible)
            {
                mainWindow.ShowDialog();
            }
            else
            {
                // 如果窗口已显示，可将其激活到前台
                mainWindow.Activate();
            }

            Close();
        }

        // 未实现的按钮事件（保留原空实现）
        private void Button_Click_5(object sender, RoutedEventArgs e) { }
        private void Button_Click_6(object sender, RoutedEventArgs e)
        {
            new LineChartDemo.MainWindow().ShowDialog();
            Close();
        }
        private void Button_Click_7(object sender, RoutedEventArgs e)
        {
            new Window6().ShowDialog();
            Close();
        }

        /// <summary>
        /// 打开报告窗口（Button8）
        /// </summary>
        private void Button_Click_8(object sender, RoutedEventArgs e)
        {
            new ReportWindow5().ShowDialog();
        }

        /// <summary>
        /// 打开报告窗口（Button9，与Button8功能一致）
        /// </summary>
        private void Button_Click_9(object sender, RoutedEventArgs e)
        {
            new ReportWindow6().ShowDialog();
        }

        /// <summary>
        /// 复位操作（Button10）
        /// </summary>
        private async void Button_Click_10(object sender, RoutedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                UpdateResetButtonStatus(_lang == "en-US" ? "Disconnected" : "连接断开", Brushes.Red);
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                return;
            }
            try
            {
                UpdateResetButtonStatus(_lang == "en-US" ? "Resetting..." : "正在复位...", Brushes.LightGreen);
                await Task.Run(() => _modbusMaster.WriteSingleCoil(0x01, _resetAddress, true));
                fc.BtnClickFunctionForNew(Function.ButtonType.复位型, _resetAddress);
                await Task.Delay(100);
                await Task.Run(() => _modbusMaster.WriteSingleCoil(0x01, _resetAddress, false));
                fc.BtnClickFunctionForNew(Function.ButtonType.复位型, _resetAddress);
                UpdateResetButtonStatus(_lang == "en-US" ? "Reset Success" : "复位成功", Brushes.LightGreen);
            }
            catch (Exception ex)
            {
                Console.WriteLine(_lang == "en-US" ? $"Reset error: {ex.Message}" : $"复位异常: {ex.Message}");
                UpdateResetButtonStatus(_lang == "en-US" ? "Reset Failed" : "复位失败", Brushes.Red);
                ShowError(_lang == "en-US" ? $"Operation error: {ex.Message}" : $"操作异常: {ex.Message}");
            }
        }

        /// <summary>
        /// 二氧化碳测试启动（Button11）
        /// </summary>
        private async void Button_Click_11(object sender, RoutedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                UpdateButtonStatus(_lang == "en-US" ? "Disconnected" : "连接断开", Brushes.Red);
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                return;
            }

            try
            {
                UpdateButtonStatus(_lang == "en-US" ? "Starting..." : "正在启动...", Brushes.LightGreen);

                // 写入启动线圈
                await Task.Run(() =>
                    _modbusMaster.WriteSingleCoilAsync(0x01, _testStartAddress, true)
                );

                // 等待并验证状态
                await Task.Delay(200);
                // 写入启动线圈
                await Task.Run(() =>
                    _modbusMaster.WriteSingleCoilAsync(0x01, _testStartAddress, false)
                );

                // 等待并验证状态
                await Task.Delay(200);
                UpdateButtonStatus(_lang == "en-US" ? "Test Start Success" : "测试启动成功", Brushes.LightGreen);
            }
            catch (Exception ex)
            {
                Console.WriteLine($"测试启动异常: {ex.Message}");
                UpdateButtonStatus(_lang == "en-US" ? "Test Start Failed" : "测试启动失败", Brushes.Red);
                ShowError($"操作异常: {ex.Message}");
            }
        }

        /// <summary>
        /// 测试停止（Button12）
        /// </summary>
        private async void Button_Click_12(object sender, RoutedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            await WriteCoilWithCheck(_testStopAddress, true, null, _lang == "en-US" ? "Test stop timeout" : "测试停止超时，状态异常", _lang == "en-US" ? "Test Stop" : "测试停止");
            TestStartButton.Content = _lang == "en-US" ? "Start Test" : "测试启动";
            TestStartButton.Foreground = Brushes.White;
        }

        /// <summary>
        /// 开始数据记录（Button13）
        /// </summary>
        private async void Button_Click_13(object sender, RoutedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                return;
            }
            try { await Task.Delay(100); fc.BtnClickFunctionForNew(Function.ButtonType.切换型, 63); }
            catch (Exception ex) { ShowError(_lang == "en-US" ? $"Operation error: {ex.Message}" : $"操作异常: {ex.Message}"); }
            ShowWarning(_lang == "en-US" ? "Recording started" : "已开始记录");
            _beginRecordTimer = CreateTimer(1000, OnBeginRecordTimerElapsed);
        }

        private async void Button_Click_14(object sender, RoutedEventArgs e)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                return;
            }
            try { await Task.Delay(100); fc.BtnClickFunctionForNew(Function.ButtonType.切换型, 64); }
            catch (Exception ex) { ShowError(_lang == "en-US" ? $"Operation error: {ex.Message}" : $"操作异常: {ex.Message}"); }

            if (_beginRecordTimer != null)
            {
                MessageBox.Show(_lang == "en-US" ? "Recording stopped" : "已停止记录", _lang == "en-US" ? "Info" : "提示", MessageBoxButton.OK, MessageBoxImage.Information);
                _beginRecordTimer.Stop(); _beginRecordTimer.Dispose(); _beginRecordTimer = null;
            }
            else
            {
                MessageBox.Show(_lang == "en-US" ? "Not recording" : "未在记录状态，无需停止", _lang == "en-US" ? "Warning" : "提示", MessageBoxButton.OK, MessageBoxImage.Warning);
                return;
            }

            var records = ReadCO2RecordsFromDatabase();
            if (records == null || !records.Any())
            {
                MessageBox.Show(_lang == "en-US" ? "No CO2 data to export" : "CO2表中无数据，无法导出", _lang == "en-US" ? "Warning" : "提示", MessageBoxButton.OK, MessageBoxImage.Warning);
                return;
            }
            bool ok = ExportCO2RecordsToExcel(records);
            if (ok) MessageBox.Show(_lang == "en-US" ? "Export to Excel success" : "数据已成功导出到Excel", _lang == "en-US" ? "Success" : "成功", MessageBoxButton.OK, MessageBoxImage.Information);
            else MessageBox.Show(_lang == "en-US" ? "Export failed" : "Excel导出失败，请检查文件是否被占用", _lang == "en-US" ? "Error" : "错误", MessageBoxButton.OK, MessageBoxImage.Error);
        }


        /// <summary>
        /// 从数据库CO2表读取数据（不变）
        /// </summary>
        private List<CO2Record> ReadCO2RecordsFromDatabase()
        {
            List<CO2Record> records = new List<CO2Record>();
            try
            {
                using (SQLiteConnection conn = new SQLiteConnection(CSConstant.DbConnectionString))
                {
                    conn.Open();
                    // 查询CO2表所有记录（按时间排序）
                    string query = "SELECT Flow, Pressure, BeginCO2, EndCO2, CO2Added, RecordTime FROM CO2 ORDER BY RecordTime desc limit 1 ";
                    using (SQLiteCommand cmd = new SQLiteCommand(query, conn))
                    {
                        using (SQLiteDataReader reader = cmd.ExecuteReader())
                        {
                            while (reader.Read())
                            {
                                records.Add(new CO2Record
                                {
                                    Flow = reader.GetDouble(0),               // 二氧化碳浓度（%）
                                    Pressure = reader.GetDouble(1),          // 压力（pa）
                                    BeginCO2 = reader.GetDouble(2),          // 开始CO2浓度（%）
                                    EndCO2 = reader.GetDouble(3),            // 终CO2浓度（%）
                                    CO2Added = reader.GetDouble(4),          // CO2浓度相对增加（%）
                                    RecordTime = reader.GetDateTime(5)       // 时间
                                });
                            }
                        }
                    }
                }
                return records;
            }
            catch (Exception ex)
            {
                MessageBox.Show($"读取CO2表失败：{ex.Message}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
                return null;
            }
        }

        /// <summary>
        /// 将CO2数据导出到Excel（WPF .NET 8 适配版）
        /// </summary>
        private bool ExportCO2RecordsToExcel(List<CO2Record> records)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            try
            {
                SaveFileDialog dlg = new SaveFileDialog
                {
                    Filter = _lang == "en-US" ? "Excel File (*.xlsx)|*.xlsx" : "Excel文件 (*.xlsx)|*.xlsx",
                    FileName = $"CO2_Record_{DateTime.Now:yyyyMMddHHmmss}.xlsx",
                    Title = _lang == "en-US" ? "Save CO2 Record" : "保存CO2记录"
                };
                if (dlg.ShowDialog() != true) return false;
                ExcelPackage.LicenseContext = LicenseContext.NonCommercial;
                using (var pkg = new ExcelPackage(new FileInfo(dlg.FileName)))
                {
                    var ws = pkg.Workbook.Worksheets.Add(_lang == "en-US" ? "CO2 Records" : "CO2记录");
                    ws.Cells[1, 1].Value = _lang == "en-US" ? "CO2(%)" : "二氧化碳浓度（%）";
                    ws.Cells[1, 2].Value = _lang == "en-US" ? "Pressure(Pa)" : "压力（pa）";
                    ws.Cells[1, 3].Value = _lang == "en-US" ? "Begin CO2(%)" : "开始CO2浓度（%）";
                    ws.Cells[1, 4].Value = _lang == "en-US" ? "End CO2(%)" : "终CO2浓度（%）";
                    ws.Cells[1, 5].Value = _lang == "en-US" ? "CO2 Added(%)" : "CO2浓度相对增加（%）";
                    ws.Cells[1, 6].Value = _lang == "en-US" ? "Time" : "时间";
                    var head = ws.Cells[1, 1, 1, 6]; head.Style.Font.Bold = true; head.Style.HorizontalAlignment = OfficeOpenXml.Style.ExcelHorizontalAlignment.Center;
                    for (int i = 0; i < records.Count; i++)
                    {
                        var row = i + 2; var r = records[i];
                        ws.Cells[row, 1].Value = r.Flow; ws.Cells[row, 2].Value = r.Pressure;
                        ws.Cells[row, 3].Value = r.BeginCO2; ws.Cells[row, 4].Value = r.EndCO2;
                        ws.Cells[row, 5].Value = r.CO2Added; ws.Cells[row, 6].Value = r.RecordTime.ToString("yyyy-MM-dd HH:mm:ss");
                    }
                    ws.Cells.AutoFitColumns(); pkg.Save();
                }
                return true;
            }
            catch (Exception ex)
            {
                MessageBox.Show(_lang == "en-US" ? $"Export failed: {ex.Message}" : $"导出失败：{ex.Message}", _lang == "en-US" ? "Error" : "错误", MessageBoxButton.OK, MessageBoxImage.Error);
                return false;
            }
        }

        /// <summary>
        /// CO2记录实体类（与数据库字段对应）
        /// </summary>
        public class CO2Record
        {
            public double Flow { get; set; }         // 二氧化碳浓度（%）
            public double Pressure { get; set; }     // 压力（pa）
            public double BeginCO2 { get; set; }     // 开始CO2浓度（%）
            public double EndCO2 { get; set; }       // 终CO2浓度（%）
            public double CO2Added { get; set; }     // CO2浓度相对增加（%）
            public DateTime RecordTime { get; set; } // 时间
        }

        private void Button_Click_15(object sender, RoutedEventArgs e) { }
        #endregion

        #region 通用操作方法（提取重复逻辑）

        /// <summary>
        /// 写入线圈并验证状态（通用方法）
        /// </summary>
        private async Task WriteCoilWithCheck(ushort coilAddress, bool value, string successMsg, string failMsg, string logMsg)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                return;
            }
            try
            {
                await Task.Run(() => _modbusMaster?.WriteSingleCoilAsync(0x01, coilAddress, value));
                Thread.Sleep(200);
                bool needReset = false;
                if (failMsg != null)
                {
                    bool stop = failMsg.Contains("停止") || failMsg.Contains("Stop") || failMsg.Contains("stop");
                    bool calib = failMsg.Contains("校准") || failMsg.Contains("Calib") || failMsg.Contains("calib");
                    needReset = stop || calib;
                }
                if (needReset)
                {
                    await Task.Run(() => _modbusMaster?.WriteSingleCoilAsync(0x01, coilAddress, false));
                }
                Thread.Sleep(100);
                await Task.Delay(500);
                bool[] status = await _modbusMaster?.ReadCoilsAsync(0x01, coilAddress, 1);
                bool noReset = false;
                if (failMsg != null)
                {
                    bool stop = failMsg.Contains("停止") || failMsg.Contains("Stop") || failMsg.Contains("stop");
                    bool calib = failMsg.Contains("校准") || failMsg.Contains("Calib") || failMsg.Contains("calib");
                    noReset = !stop && !calib;
                }
                if (noReset && status != null && status.Length > 0 && status[0] == value)
                {
                    WriteLog($"{logMsg} - Address: {coilAddress}, State: {value}");
                    if (!string.IsNullOrEmpty(successMsg)) ShowSuccess(successMsg);
                }
                else if (noReset) ShowError(failMsg);
            }
            catch (Exception ex)
            {
                ShowError(_lang == "en-US" ? $"Communication error: {ex.Message}" : $"通信错误: {ex.Message}");
            }
        }

        /// <summary>
        /// 保存记录到数据库
        /// </summary>
        private void SaveRecordToDatabase(double flow, double pressure, double beginCo2, double endCo2, double co2Added)
        {
            try
            {
                flow = Math.Round(flow, 2);
                pressure = Math.Round(pressure, 2);
                beginCo2 = Math.Round(beginCo2, 2);
                endCo2 = Math.Round(endCo2, 2);
                co2Added = Math.Round(co2Added, 2);
                using (var conn = new SQLiteConnection(CSConstant.DbConnectionString))
                {
                    conn.Open();
                    string insertSql = @"
                        INSERT INTO CO2(Flow, Pressure, BeginCO2, EndCO2, CO2Added, RecordTime)
                        VALUES (@Flow, @Pressure, @BeginCO2, @EndCO2, @CO2Added, @RecordTime);";
                    using (var cmd = new SQLiteCommand(insertSql, conn))
                    {
                        cmd.Parameters.AddWithValue("@Flow", flow);
                        cmd.Parameters.AddWithValue("@Pressure", pressure);
                        cmd.Parameters.AddWithValue("@BeginCO2", beginCo2);
                        cmd.Parameters.AddWithValue("@EndCO2", endCo2);
                        cmd.Parameters.AddWithValue("@CO2Added", co2Added);
                        cmd.Parameters.AddWithValue("@RecordTime", DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss"));
                        cmd.ExecuteNonQuery();
                    }
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine($"保存数据库失败: {ex.Message}");
                ShowWarning($"数据保存失败: {ex.Message}");
            }
        }
        #endregion

        #region 辅助方法（UI状态更新、日志、消息提示）
        /// <summary>
        /// 更新测试按钮状态UI
        /// </summary>
        private void UpdateButtonStatus(string text, Brush color)
        {
            UpdateUiSafely(() =>
            {
                TestStartButton.Content = text;
                TestStartButton.Foreground = color;
            });
        }

        private void UpdateAddButtonStatus(string text, Brush color)
        {
            UpdateUiSafely(() =>
            {
                addPaBtn.Content = text;
                addPaBtn.Foreground = color;
            });
        }

        /// <summary>
        /// 更新复位按钮状态UI
        /// </summary>
        private void UpdateResetButtonStatus(string text, Brush color)
        {
            UpdateUiSafely(() =>
            {
                ResetBtn.Content = text;
                ResetBtn.Foreground = color;
            });
        }

        /// <summary>
        /// 日志路径
        /// </summary>
        private string logPath => System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "modbus_log.txt");

        /// <summary>
        /// 写入操作日志
        /// </summary>
        private void WriteLog(string content)
        {
            try
            {
                string log = $"[{DateTime.Now:yyyy-MM-dd HH:mm:ss}] {content}\r\n";
                System.IO.File.AppendAllText(logPath, log);
            }
            catch (Exception ex)
            {
                Console.WriteLine($"写入日志失败: {ex.Message}");
            }
        }

        /// <summary>
        /// 加载窗口背景
        /// </summary>
        private void Window_Loaded(object sender, RoutedEventArgs e)
        {
            try
            {
                string imagePath = System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "Resources/sleep2.jpg");
                if (System.IO.File.Exists(imagePath))
                {
                    Background = new ImageBrush
                    {
                        ImageSource = new BitmapImage(new Uri(imagePath, UriKind.Absolute))
                    };
                }
                else
                {
                    Console.WriteLine($"背景图片不存在: {imagePath}");
                }
            }
            catch (Exception ex)
            {
                Console.WriteLine($"加载背景失败: {ex.Message}");
            }
        }
        bool _isWriting;
        // 消息提示封装（统一风格）
        private void ShowSuccess(string message) => MessageBox.Show(message, "成功", MessageBoxButton.OK, MessageBoxImage.Information);
        private void ShowWarning(string message) => MessageBox.Show(message, "提示", MessageBoxButton.OK, MessageBoxImage.Warning);
        private void ShowError(string message) => MessageBox.Show(message, "错误", MessageBoxButton.OK, MessageBoxImage.Error);
        #endregion


        private async Task WriteRegisterWithValidation(TextBox inputControl, ushort registerAddress, float minValue, float maxValue)
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected()) { ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接"); return; }
            try
            {
                inputControl.Text = _lang == "en-US" ? "Processing..." : "操作中...";
                Function ma = new Function(_modbusMaster);
                ma.WriteToPLCForNew("", registerAddress, Function.DataType.浮点型);
                await Task.Delay(300);
            }
            catch (Exception ex) { ShowError(_lang == "en-US" ? $"Operation failed: {ex.Message}" : $"操作失败: {ex.Message}"); }
        }


        private bool _isPressurizing = false;
        private CancellationTokenSource _pressurizeCts;

        private async void Button_Click_16(object sender, RoutedEventArgs e)
        {
            _isPressurizing = !_isPressurizing;

            if (_isPressurizing)
            {
                // 开始持续加压
                await StartPressurizeLoop();
            }
            else
            {
                // 停止加压（取消循环并复位状态）
                StopPressurize();
            }
        }

        /// <summary>
        /// 开始持续加压循环
        /// </summary>
        private async Task StartPressurizeLoop()
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (!IsModbusConnected())
            {
                UpdateAddButtonStatus(_lang == "en-US" ? "Disconnected" : "连接断开", Brushes.Red);
                ShowError(_lang == "en-US" ? "Modbus TCP not connected" : "Modbus TCP 未连接");
                _isPressurizing = false; return;
            }
            _pressurizeCts = new CancellationTokenSource(); var token = _pressurizeCts.Token;
            try
            {
                UpdateAddButtonStatus(_lang == "en-US" ? "Pressurizing..." : "正在加压...", Brushes.LightGreen);
                while (_isPressurizing && !token.IsCancellationRequested)
                {
                    await Task.Run(() => _modbusMaster.WriteSingleCoilAsync(0x01, 657, true));
                    await Task.Delay(200);
                    if (!IsModbusConnected()) throw new Exception(_lang == "en-US" ? "Modbus disconnected" : "Modbus连接中途断开");
                }
                if (!token.IsCancellationRequested) UpdateAddButtonStatus(_lang == "en-US" ? "Pressurize" : "加压", Brushes.White);
            }
            catch (Exception ex)
            {
                Console.WriteLine(_lang == "en-US" ? $"Pressurize error: {ex.Message}" : $"加压异常: {ex.Message}");
                UpdateAddButtonStatus(_lang == "en-US" ? "Press Failed" : "加压失败", Brushes.Red);
                ShowError(_lang == "en-US" ? $"Operation error: {ex.Message}" : $"操作异常: {ex.Message}");
                _isPressurizing = false;
            }
        }


        /// <summary>
        /// 停止加压（复位状态和资源）
        /// </summary>
        private void StopPressurize()
        {
            string _lang = ConfigurationManager.AppSettings["Language"] ?? "zh-CN";
            if (_pressurizeCts != null && !_pressurizeCts.IsCancellationRequested) { _pressurizeCts.Cancel(); _pressurizeCts.Dispose(); }
            _isPressurizing = false;
            UpdateAddButtonStatus(_lang == "en-US" ? "Pressurize" : "加压", Brushes.White);
            try { if (IsModbusConnected()) _modbusMaster.WriteSingleCoilAsync(0x01, 657, false).Wait(); } catch { }
        }

        private async void Button_Click_17(object sender, RoutedEventArgs e)
        {

            try
            {
                // 验证并写入呼吸比-呼气值
                await WriteRegisterWithValidation(
                    inputControl: OutTxt,
                    registerAddress: 342,  // 呼吸比-呼气寄存器地址
                    minValue: 1,                         // 呼吸比最小1
                    maxValue: 10000                      // 呼吸比最大20
                );
            }
            finally
            {

            }

        }

        private async void Button_Click_21(object sender, RoutedEventArgs e)
        {
            try
            {
                // 验证并写入频率系数值
                await WriteRegisterWithValidation(
                    inputControl: frequencyTxt,
                    registerAddress: 368,  // 频率系数寄存器地址（根据实际地址修改）
                    minValue: 0.1f,        // 频率系数最小0.1
                    maxValue: 10f          // 频率系数最大10
                );
            }
            finally
            {

            }
        }

        private async void Button_Click_20(object sender, RoutedEventArgs e)
        {
            try
            {
                // 验证并写入呼吸频率值
                await WriteRegisterWithValidation(
                    inputControl: respiratoryRateTxt,
                    registerAddress: 210,  // 呼吸频率寄存器地址（根据实际地址修改）
                    minValue: 1,           // 呼吸频率最小5
                    maxValue: 10000           // 呼吸频率最大60
                );
            }
            finally
            {

            }
        }

        private async void Button_Click_19(object sender, RoutedEventArgs e)
        {
            try
            {
                // 验证并写入潮气量值
                await WriteRegisterWithValidation(
                    inputControl: moistureTxt,
                    registerAddress: 300,
                    minValue: 0.1f,        // 潮气量最小0.1
                    maxValue: 10000f          // 潮气量最大20
                );
            }
            finally
            {

            }
        }

        private async void Button_Click_18(object sender, RoutedEventArgs e)
        {
            try
            {
                // 验证并写入呼吸比-吸气值
                await WriteRegisterWithValidation(
                    inputControl: InTxt,
                    registerAddress: 340,
                    minValue: 1,           // 呼吸比最小1
                    maxValue: 10000          // 呼吸比最大500
                );
            }
            finally
            {
            }
        }
    }
}