kou_zhaoxielou_shandong/口罩泄露定制款/Data/ExperData.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace 口罩泄露定制款
{
    public class ExperData : INotifyPropertyChanged
    {
        public event PropertyChangedEventHandler PropertyChanged;

        #region 实验属性
        static string experName = "";
        /// <summary>
        /// 实验人员
        /// </summary>
        public string ExperName { get { return experName; } set { experName = value; } }

        static string experDate = "";
        /// <summary>
        /// 实验日期
        /// </summary>
        public string ExperDate { get { return experDate; } set { experDate = value; } }

        static string experNum = "";
        /// <summary>
        /// 实验编号
        /// </summary>
        public string ExperNum { get { return experNum; } set { experNum = value; } }

        static string experType = " ";
        /// <summary>
        /// 实验种类
        /// </summary>
        public string ExperType { get { return experType; } set { experType = value; } }

        static float experMaskType = 2.0f;
        /// <summary>
        /// 口罩类型泄漏率标准
        /// </summary>
        public float ExperMaskType { get { return experMaskType; } set { experMaskType = value; } }

        /// <summary>
        /// 面罩类型
        /// </summary>
        static string maskType;
        public string MaskType { get { return maskType; } set { maskType = value; } }

        static float _testDuration = 120f; // 测试时间改为120秒
        /// <summary>
        /// 测试时长（秒）
        /// </summary>
        public float TestDuration { get { return _testDuration; } set { _testDuration = value; } }

        static string _testStatus = "";
        /// <summary>
        /// 实验状态
        /// </summary>
        public string TestStatus { get { return _testStatus; } set { _testStatus = value; } }

        static float benDiNongDu = 0.00f;
        /// <summary>
        /// 本底浓度(mg/m³)
        /// </summary>
        public float BenDiNongDu { get { return benDiNongDu; } set { benDiNongDu = value; } }

        static float huanJingWenDu = 0.00f;
        /// <summary>
        /// 环境温度
        /// </summary>
        public float HuanJingWenDu { get { return huanJingWenDu; } set { huanJingWenDu = value; } }

        static float huanJingShiDu = 0.00f;
        /// <summary>
        /// 环境湿度
        /// </summary>
        public float HuanJingShiDu { get { return huanJingShiDu; } set { huanJingShiDu = value; } }

        static float o2NongDu = 0.00f;
        /// <summary>
        /// 环境氧浓度
        /// </summary>
        public float O2NongDu { get { return o2NongDu; } set { o2NongDu = value; } }

        static float cO2NongDu = 0.00f;
        /// <summary>
        /// 环境CO2浓度
        /// </summary>
        public float CO2NongDu_Indoor { get { return cO2NongDu; } set { cO2NongDu = value; } }

        static float inDoor_TSINongDu = 0.00f;
        /// <summary>
        /// 环境气溶胶浓度(mg/m³)
        /// </summary>
        public float InDoor_TSINongDu { get { return inDoor_TSINongDu; } set { inDoor_TSINongDu = value; } }

        static float mask_CO2NongDu = 0.00f;
        /// <summary>
        /// 口罩内CO2浓度
        /// </summary>
        public float Mask_CO2NongDu { get { return mask_CO2NongDu; } set { mask_CO2NongDu = value; } }

        static float mask_TSINongDu = 0.00f;
        /// <summary>
        /// 口罩内气溶胶浓度(mg/m³)
        /// </summary>
        public float Mask_TSINongDu { get { return mask_TSINongDu; } set { mask_TSINongDu = value; } }

        static float _liuLiang = 0.00f;
        /// <summary>
        /// 流量(L/min)
        /// </summary>
        public float LiuLiang { get { return _liuLiang; } set { _liuLiang = value; } }

        static float _xieloulv = 0.00f;
        /// <summary>
        /// 泄露率(%)
        /// </summary>
        public float XieLouLv { get { return _xieloulv; } set { _xieloulv = value; } }

        // 新增：采样流量和干燥气流流量（根据YY/T 0866-2024标准）
        static float _samplingFlowRate = 2.0f; // 默认采样流量2L/min
        public float SamplingFlowRate { get { return _samplingFlowRate; } set { _samplingFlowRate = value; } }

        static float _dryingFlowRate = 1.0f; // 默认干燥气流1L/min
        public float DryingFlowRate { get { return _dryingFlowRate; } set { _dryingFlowRate = value; } }

        #endregion

        #region 泄漏率计算方法（根据YY/T 0866-2024标准）

        /// <summary>
        /// 连续采样法泄漏率计算（公式2）
        /// P = 1.25 * ((C2 - C0) / C1) * ((S + D) / S) * 100
        /// </summary>
        public float ContinuousSamplingLeakageRate(List<float> indoorData, List<float> outdoorData,
                                                  float backgroundConcentration,
                                                  float samplingFlow, float dryingFlow)
        {
            if (indoorData.Count == 0 || outdoorData.Count == 0)
                return 0.0f;

            // 使用最后100秒的数据（标准要求）
            int dataCount = Math.Min(indoorData.Count, outdoorData.Count);
            int startIndex = Math.Max(0, dataCount - 100); // 取最后100个数据点

            // 计算最后100秒的平均值
            float C1 = 0, C2 = 0;
            int validCount = 0;

            for (int i = startIndex; i < dataCount; i++)
            {
                C1 += indoorData[i];
                C2 += outdoorData[i];
                validCount++;
            }

            if (validCount == 0)
                return 0.0f;

            C1 /= validCount;
            C2 /= validCount;

            // 应用连续采样法公式
            if (C1 <= 0)
                return 0.0f;

            // P = 1.25 * ((C2 - C0) / C1) * ((S + D) / S) * 100
            float leakageRate = 1.25f * ((C2 - backgroundConcentration) / C1) *
                              ((samplingFlow + dryingFlow) / samplingFlow) * 100;

            return Math.Max(0, leakageRate); // 确保非负
        }

        /// <summary>
        /// 脉冲式采样法泄漏率计算（公式1） - 备用
        /// </summary>
        public float PulsedSamplingLeakageRate(List<float> indoorData, List<float> outdoorData,
                                              float backgroundConcentration,
                                              float samplingFlow, float dryingFlow,
                                              float totalInhaleTime, float totalExhaleTime)
        {
            if (indoorData.Count == 0 || outdoorData.Count == 0 || totalInhaleTime <= 0)
                return 0.0f;

            // 使用最后100秒的数据
            int dataCount = Math.Min(indoorData.Count, outdoorData.Count);
            int startIndex = Math.Max(0, dataCount - 100);

            float C1 = 0, C2 = 0;
            int validCount = 0;

            for (int i = startIndex; i < dataCount; i++)
            {
                C1 += indoorData[i];
                C2 += outdoorData[i];
                validCount++;
            }

            if (validCount == 0 || C1 <= 0)
                return 0.0f;

            C1 /= validCount;
            C2 /= validCount;

            // P = ((C2 - C0) / C1) * ((t_w + t_cm) / t_w) * ((S + D) / S) * 100
            float leakageRate = ((C2 - backgroundConcentration) / C1) *
                              ((totalInhaleTime + totalExhaleTime) / totalInhaleTime) *
                              ((samplingFlow + dryingFlow) / samplingFlow) * 100;

            return Math.Max(0, leakageRate);
        }

        #endregion
    }
}