页面逻辑添加

Models/PlcConfiguration.cs

@@ -9,12 +9,16 @@
         // 硬度
         public ushort HardnessValue { get; set; }
         public ushort HardnessStartCoil { get; set; }
-        public ushort HardnessStartCoil2 { get; set; }
-        public ushort HardnessStartCoil3 { get; set; }
+
         public ushort HardnessCompleteCoil { get; set; }
         public ushort HardnessStartReset { get; set; }
         public ushort HardnessStartStop { get; set; }
-   
+
+        public ushort HardnessSudu { get; set; }
+        public ushort HardnessWeiyi { get; set; }
+        public ushort HardnessPoSun { get; set; }
+
+
         // 脆碎度
         public ushort FriabilityStartCoil { get; set; }
         public ushort WeightBefore { get; set; }    // 天平重量寄存器（可选）

ViewModels/StationViewModel.cs

@@ -58,6 +58,21 @@ namespace TabletTester2025.ViewModels
         [ObservableProperty] private bool _hardnessPass;
         [ObservableProperty] private double _hardnessAvg;
         [ObservableProperty] private double _hardnessRSD;
+
+
+        //硬度新增
+        //[ObservableProperty] private int _hardnessForward = 0;//硬前进
+        //[ObservableProperty] private int _hardnessBack = 1;//硬后退
+        //[ObservableProperty] private int _hardnessOver = 72; //硬度完成
+        //[ObservableProperty] private int _hardnessStartOver = 92;// 硬复位完成
+        //[ObservableProperty] private int _hardnessLimit = 298;// 硬度电机极限输入
+        [ObservableProperty] private double _hardnessSudu = 300;// 硬度速度输入mm/min
+        [ObservableProperty] private double _hardnessWeiyi = 310;  // 硬度位移输入mm/min
+        [ObservableProperty] private double _hardnessPoSun = 400;  // 硬度破损判定输入N
+        //[ObservableProperty] private int _hardnessMaxN = 72;  //最大力采集
+
+
+
         private List<double> _hardnessResults = new();
 
         // 脆碎度
@@ -787,7 +802,7 @@ namespace TabletTester2025.ViewModels
             if (Phase != TestPhase.Idle) return;
             CurrentTest = TestType.Hardness;
             Phase = TestPhase.Running;
-            HardnessPass = false;   // 添加这一行
+            HardnessPass = false;
             _hardnessResults.Clear();
 
             try
@@ -796,33 +811,44 @@ namespace TabletTester2025.ViewModels
                 double min = App.CurrentPharmaParams.HardnessMin_N;
                 double max = App.CurrentPharmaParams.HardnessMax_N;
 
-                for (int i = 0; i < count; i++)
 
-                {  // 1. 给PLC发指令：启动单次硬度测试
+                double currentSpeed = _hardnessSudu;
+                double currentWeiyi = _hardnessWeiyi;
+                double currentPoSun = _hardnessPoSun;
+
+                // 如果你需要把这3个值发给PLC，就在这里发一次（测试开始用当前参数）
+                await _plc.WriteFloatAsync(_plcConfig.HardnessSudu, (float)currentSpeed);
+                await _plc.WriteFloatAsync(_plcConfig.HardnessWeiyi, (float)currentWeiyi);
+                await _plc.WriteFloatAsync(_plcConfig.HardnessPoSun, (float)currentPoSun);
+
+                // 开始循环测试
+                for (int i = 0; i < count; i++)
+                {
                     await _plc.WriteCoilAsync(_plcConfig.HardnessStartCoil, true);
+
                     bool completed = false;
                     while (!completed && Phase == TestPhase.Running)
                     {
-                        await Task.Delay(200);// 每200ms轮询一次状态
-
+                        await Task.Delay(200);
                         completed = await _plc.ReadCoilAsync(_plcConfig.HardnessCompleteCoil);
                     }
+
                     double val = await _plc.ReadFloatAsync(_plcConfig.HardnessValue);
-                    _hardnessResults.Add(val); // 把结果存到列表里
+                    _hardnessResults.Add(val);
+                    HardnessValue = val;
 
-                    HardnessValue = val;  // 更新界面上的实时测试力值
-
-                    await Task.Delay(1000); // 间隔1秒，再进行下一次测试
+                    await Task.Delay(1000);
                 }
 
+                // 计算结果
                 HardnessAvg = _hardnessResults.Average();
-                HardnessMax= _hardnessResults.Max();
+                HardnessMax = _hardnessResults.Max();
                 HardnessMin = _hardnessResults.Min();
-
                 HardnessCurrentCount = count;
                 HardnessRSD = (StandardDeviation(_hardnessResults) / HardnessAvg) * 100;
                 HardnessPass = HardnessAvg >= min && HardnessAvg <= max;
-                Phase = TestPhase.Completed;//恢复启动按钮
+
+                Phase = TestPhase.Completed;
             }
             catch (Exception ex)
             {
@@ -832,11 +858,6 @@ namespace TabletTester2025.ViewModels
             finally
             {
                 Phase = TestPhase.Idle;
-
-                // 在保存前设置崩解合格标志：剩余管数为0 且 崩解时间未超时
-                //DisintegrationPass = (RemainingTubes == 0 && DisintegrationSeconds <= App.CurrentPharmaParams.DisintegrationMaxSeconds);
-
-
                 await SaveBatchResult();
             }
         }

appsettings.json

@@ -7,24 +7,20 @@
     "IpAddress": "192.168.1.10",
     "Port": 502,
     "SlaveId": 1,
-    "HardnessValue": 100,
+    "HardnessValue": 72, //最大力采集
     "HardnessStartCoil": 70, //硬度工位1启动测试M70
-    "HardnessStartCoil2": 70, //硬度工位1启动测试M70
-    "HardnessStartCoil3": 70, //硬度工位1启动测试M70
+
     "HardnessStartStop": 73, // 硬度停止
     "HardnessStartReset": 90, // 硬复位启动
 
     "HardnessForward": 0, //硬前进
     "HardnessBack": 1, //硬后退
-  
     "HardnessOver": 72, //硬度完成
-
     "HardnessStartOver": 92, // 硬复位启动
     "HardnessLimit": 298, // 硬度电机极限输入
     "HardnessSudu": 300, // 硬度速度输入mm/min
     "HardnessWeiyi": 310, // 硬度位移输入mm/min
-    "HardnessPoSun": 310, // 硬度破损判定输入N
-    "HardnessMax": 310, //最大力采集
+    "HardnessPoSun": 400, // 硬度破损判定输入N